Zoom RhythmTrak 234 Specifications Page 7

  • Download
  • Add to my manuals
  • Print
  • Page
    / 88
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 6
ZOOM RT-223
7
OPEN
BATTERY:R6(SUM-3)or"AA"SIZEx4
Tab
Bottom view of RT-223
Battery
compartment
cover
Battery compartment
IEC R6 (size AA) battery x 4
Batteries must all face in the same direction.
Using the Unit on Batteries
The RT-223 can be powered from four IEC R6 (size AA) batteries. Follow the steps below to insert the
batteries.
1.
Turn the unit over and open the
battery compartment cover.
2.
Insert four fresh IEC R6 (size AA)
alkaline batteries.
3.
Close the battery compartment
cover.
NOTE
If the “BATT” symbol appears while the
unit is powered from batteries, the
batteries are exhausted. Replace the
batteries as soon as possible.
Preparations
1.
With the playback system turned off
and the volume fully turned down,
double-check whether all connections
have been made correctly.
2.
To power the unit from the AC
adapter(optional),connect the AC
adapter to the [DC IN] connector and
turn the [VOLUME] control fully down.
3.
Set the [POWER] switch of the
RT-223 to ON, and then turn power
to the playback system on.
4.
While tapping a pad to produce
sound, adjust the [VOLUME] control
of the RT-223 and the volume
control on the playback system to a
suitable position.
After connections are established, check the sound by performing the following steps.
Page view 6
1 2 3 4 5 6 7 8 9 10 11 12 ... 87 88

Comments to this Manuals

No comments