Zoom G2.1u Specifications download pdf (Page 5)

ZOOM G2.1u

Selecting a Patch

A 1

HINT

Turn power on

Set the G2.1u to play mode

Use a monaural shielded cable to connect

the guitar to the [INPUT] jack of the G2.1u.

When using the G2.1u with the AC

adapter, plug the adapter into the outlet

and plug the cable from the adapter into

the [DC IN] jack on the G2.1u.

Turn the guitar amplifier on and adjust

the volume to a suitable position.

If the Module selector is set to a position

other than "PLAY", set it to "PLAY".

The bank and patch

that were selected

when the power was

last turned off will

appear on the display.

Select a patch

To switch the patch, press one of the [W]/[Q] foot switches.

Pressing the [W] foot switch calls up the next lower patch, and pressing the [Q] foot

switch calls up the next higher patch.

Repeatedly pressing one foot switch cycles through patches in the order A0 – A9 ... d0 – d9

→ 00 – 09 ... 30 – 39 → A0, or the reverse order.

Immediately after turning the G2.1u on,

the unit will be in play mode, even if the

Module selector is set to a position other

than "PLAY".

Set the [POWER] switch on the rear

panel of the G2.1u to ON.

Bank name Patch number

To try out the various effects of the G2.1u, we recommend that you simply play your instrument while

switching patches.

Selecting a Patch

ZOOM G2.1u

NOTE

Adjust tone and volume

To adjust the effect sound and volume

levels in play mode, the Parameter

knobs 1 – 3 can be used. Each knob

controls a specific parameter.

When you turn a Parameter knob, the

corresponding LED lights up and the display

briefly shows the current value of the respective

parameter.

• If the DRIVE module is set to OFF for the

currently selected module (display shows

"oF"), Parameter knobs 1 and 2 have no effect.

• Changes made here are temporary and will be

lost when you select another patch. To retain

the changes, store the patch in the user area.

• The master level in common to all patches is

set in edit mode (→ p. 34).

Parameter knob 2

Parameter knob 1 Parameter knob 3

Adjusts the GAIN

parameter of the

DRIVE module (mainly

distortion depth).

Adjusts the PATCH

LEVEL parameter

(output level of the

entire patch).

Adjusts the TONE parameter of the DRIVE

module (mainly distortion sound character).

Directly selecting a bank

To select the banks A – d, 0 – 3 directly, use

the BANK [-]/[+] keys.

Pressing the BANK [-] key calls up the next lower bank, and

pressing the BANK [+] key calls up the next higher bank.

1 2 3 4 5 6 7 8 9 10 ... 22 23

Comments to this Manuals

No comments

Zoom G2.1u Specifications Page 5

Comments to this Manuals

Related products and manuals for Guitar accessories Zoom G2.1u