Expression 8000 Q4 Zoom V1 ORDERCODE 41358 Highlite International B.V. Vestastraat 2 6468 EX Kerkrade The Netherlands
8 Control Modes There are 5 modes: • Built-in Programs • Auto Run • Sound-controlled • Master/Slave • DMX512: Person1 (10CH) Person2 (16CH) Person
9 Multiple Expressions (DMX Control) 1. Fasten the effect light onto firm trussing. Leave at least 0,5 meter on all sides for air circulation. 2. A
10 Fixture Linking You will need a serial data link to run light shows of one or more fixtures using a DMX-512 controller or to run synchronized show
11 The Expression 8000 can be operated with a controller in control mode or without the controller in stand-alone mode. Control Panel
12 Menu Overview See below The Wireless menu will only be visible, o
13 Once you have entered a step you will see menu 4.2.2 - 4.2.12 (Pan - Use)
15 Main Menu Options Press the MODE button to scroll through 7 options of the menu: 1. Address DMX Addressing With thi
16 3. Settings
17 Settings main menu 3.1 Wireless The Wireless menu will only be visible, once you have entered NO in Menu Service ME
Congratulations! You have bought a great, innovative product from Showtec. The Showtec Expression 8000 brings excitement to any venue. Whether you wa
18 3.2 Perform 1) Press Menu, until the display shows: Settings 2) Press Enter and use the Up/Down bu
19 Dimmer DIM1, DIM2, DIM3, DIM4, OFF When DIMMER is set to OFF, then RGBW and MASTER DIMMER are linear. Dim 1, 2, 3, 4 are speed modes of
20 4. Stand-Alone 4.1 Run DMX Active With this menu you able to control the device by DMX. 1) Press Menu, until the display shows: Stand Alon
21 4.2 Edit Once you have entered a step you will see menu 4.2.2 - 4.2.12 (Pan - Use) 1) Press Menu, until the display shows: Stand Alone. 2)
22 6. Manual 6.1 Reset Options With this menu you can reset the device. 1) Press Menu, until the display shows: Manual. 2) Press Enter and use
23 7.2 Calibration Colors 1) Press Menu, until the display shows: Service. 2) Press
24 7.3 Access Mode 1) Press Menu, until the display shows: Service. 2) Press Enter and use the Up/Down buttons to go to the Access menu. 3)
25 DMX Channels 10 Channels (Person 1) Channel 1 – Horizontal movement (Pan) Push the slider up, in order to move head horizontally (PAN). Gradual
26 16 Channels (Person 2) Channel 1 – Horizontal movement (Pan) Push the slider up, in order to move head horizontally (PAN). Gradual head adjustme
27 Channel 11 – Rings + Programs 0-9 All rings 10-19 Ring 1 20-29 Ring 2 Up 30-39 Ring 2 Down 40-49 Ring 3 Up 50-59 Ring 3 Down 60-69 Ring Effect 1
1 Showtec Showtec Expression 8000 Zoom Q4™ Product Guide Warning ...
28 29 Channels (Person 3) Channel 1 – Horizontal movement (Pan) Push the slider up, in order to move head horizontally (PAN). Gradual head adjustme
29 Channel 18 – Red Outer Top ring (Dimmer must be open ) 0-255 Gradual adjustment Red from 0 – 100% Channel 19 – Green Outer Top ring (Di
30 8 Channels (Person 4) Channel 1 – Horizontal movement (Pan) Push the slider up, in order to move head horizontally (PAN). Gradual head adjustmen
31 29 Channels (Person 5) Channel 1 – Horizontal movement (Pan) Push the slider up, in order to move head horizontally (PAN). Gradual head adjustme
32 Channel 13 – White Center ring (Dimmer must be open ) 0-255 Gradual adjustment Blue from 0 – 100% Channel 14 – Red Middle Top ring (Dimm
33 Channel settings Person 1 Person 2 Person 3
34 Person 4 Person 5 Maintenance The operator has to make sure that safety-relating and machine-technical installations ar
35 Replacing a Fuse Power surges, short-circuit or inappropriate electrical power supply may cause a fuse to burn out. If the fuse burns out, the pro
36 Problem Probable cause(s) Remedy One or more fixtures are completely dead. No power to the fixture • Chec
37 Product Specification Model: Showtec Expression 8000 Voltage: 100-240V-50Hz (CE) Peak power 475 Watt Fuse T6,3A / 250V Dimensions: 400 x 270 x 463
2 Warning Unpacking Instructions Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure that all p
3 Never let the power-cord come into contact with other cables! Handle the power-cord and all connections with the mains with particular caution!
4 Operating Determinations • This device is not designed for permanent operation. Consistent operation breaks will ensure that the device will s
5 Connection with the mains Connect the device to the mains with the power-plug. Always pay attention, that the right color cable is connected to the
6 Description of the device Features The Showtec Expression 8000 is a moving-head with high output and great effects. • Bright Output • 4-in-1 Techn
7 Backside Fig. 2 3 4 5 6 7 8 9 10 3) Fuse T6,3 AL 250V
Comments to this Manuals